Відео

You need to caal it first, so it will wake up! After that you will be able to manage it within the app

@@morneo3 gracias creo que no metí apn

There could be several options: 1)Was the APN setup correctly? 2)Is your mobile operator supporting 2G network? 3)Is there enough money on the prepaid SIM?

GPS: GPS coordinates; LBS:Cell Tower (LBS). So, when you have both, the accuracy is more precise, I guess

@@morneo3 more precise IS when both filters are enable? Or disable?

@@DavilinAlia Unfortunately, I wasn't playing with this setting, so I cannot tell, what option will do what.

Thank you. It could be also the case, that your operator doesn't support 2G network anymore, hard to say. Or you can try another prepaid sim card, from another operator

@@morneo3 it does support, and the SIM card works fine in a unlocked mobile device, it seems there was something wrong with the GPS or Im not doing something right

@@sergiomadureira9985 Got it and you have already successfully passed the initial setup? turning on GPRS feature, setting APN name, the GPS signal is good, so the blue led isn't flashing...

@@morneo3 its when I try to setup the gprs and apn that I get stuck, I send the txt messages and get nothing back, so the blue led light never flashes

@@sergiomadureira9985 I would recommend to use a SIM card from another provider. You are all good, when orange light (gprs working) and blue light are solid (gps working)

You could try to turn off the 'timer' function: ua-cam.com/video/iTFNnRTnd_A/v-deo.htmlsi=0LSt32vCloCI9w-2&t=401

How ????

Hi. I'm glad, it helped you. I'm using simple pre-paid SIM card, which came in the nano format.

thank you for your response! after setting admin number, i did not get sms from unit. how do i activate sms and calls options to be able to respond?

Why would you need to change the IMEI identificator? I don't think it's possible in this case.

Ahoj, som rad, ze bolo prinosne. Ono ta appka je taka oldschool a nema ziadny widget na plochu bohuzial. Ale pri motorke moze vznikat aj vela falosnych alarmov, ked je vonku a zafuka vietor napriklad - v garazi to bude na 100%, ze pride notifikacia, len ked niekto naozaj s nou manipuluje

@@morneo3 to je az tak moc citlivé ze ked zafuka vietor tak to posle alarm? A teda alarm posiela cez sms ci sa to da nastavit aby to poslalo cez apku? Vdaka za info.

Ano, robilo mi to vonku falosne alarmy, treba skusit. Kazdopadne zapinanie a vypinanie 'vibration' alarmu mi nikdy spravne nefungovalo cez appku, bohuzial len cez sms

Hi there. It seems to me like a problems with GPS signal. What is the blue LED doing, is it blinking or solid?

Hi, the problem is now fixed. You are right the issue was with GPS signal. Thank you

Hi. Unfortunately, I'm not aware of this kind of command to turn off low battery notification

Hi, that's strange. Have you tried to call from another SIM card?

That's a pitty, if you will have a specific question, maybe I can help you

Hi. If you want, you can try to send this SMS message, I found in the product manual - This command should reset hardware: begin123456

@WINNES.TKMARS-GPS-tracker OK, what us the command?

Thank you. I have the experience the only notifications working without SMS and only via app are 'geo fence' notifications. The 'vibration' alarm is working best only via sms, not so reliable via the app.

Hello, could you please give me the example of such command for turning off the sms notifications?

Hi. Most SMS I receive is from 'vibration alarm' or from 'overspeed alarm'. So try to set off your vibration alarm by sms (it's not very good working over the app) and set the overspeed alarm like to 250 km/h :)

Hi. You should turn it on in settings. Try to go accordingly with video in 11:57

Unfortunately I don't have this experimence, so I cannot approve whether the unit/magnet will withstand all vibrations and shaking under the car.

If you want, you can try to send this SMS message, I found in the product manual - This command should reset hardware: begin123456

That's correct, LED lights still works during sleep, until you specifically disable them in application

Thank you :)

How about the blue light on the GPS tracker, is it solid or is it blinking?

@@morneo3 thaks for responding, and sorry taking so long, I waited for the battery to run out, then did a reset and new configuration, it worked. thank you!

Unfortunately, I don't know

@@morneo3 I have been searching all over the internet and cannot find any info regarding these two options.... thanks for the help anyway, your video was very usefull.

Ok so here is the answer I got from the official support: LBS base station positioning LBS base station positioning, the English name is LocationBasedService, or LBS for short, is generally used by mobile phone users. It is a location-based service through telecommunications and mobile operators' radio communication networks (such as GSM networks, CDMA networks) or external positioning methods (such as GPS). A value-added service that obtains the location information (geographic coordinates, or geodetic coordinates) of mobile terminal users and provides users with corresponding services with the support of the GIS (Geographic Information System) platform. Principle: When the mobile phone is registered with the SIM card, the location of the mobile phone can be obtained through a specific algorithm through the signal difference with different base stations, plus the known base station location. WIFI real-time positioning WIFI real-time positioning is a new technology that uses the existing wireless network, cooperates with WIFI tags and related mobile terminal devices such as WIFI mobile phones, PDAs, laptops, etc., and combines it with corresponding positioning algorithms to determine the location of relevant people and items. Principle: WIFI is mainly used for indoor positioning. Like LBS, each wireless AP has a globally unique MAC address. When the WIFI is turned on, the device can scan and collect surrounding AP signals. Regardless of whether it is encrypted or connected, when the signal strength is not strong enough to be displayed in the wireless list, it can obtain the MAC address broadcast by the AP. The device then sends these AP data to the location server. The server retrieves the geographical location of each AP, combines the strength of the signal, calculates the geographical location of the device, and returns it to the user device.

In a few words do not enable these options for more detailed tracking. I don't know how it affects the battery

Then try to do first few steps of the initial configuration and later if you will call your SIM card in the tracker, it should send you an SMS along with the ID information. Later, you can use this ID to sign into the application

Thank you, you are the best!!!@@morneo3

@@siukslessiuksles1894 You are welcome :)

Hello. The best you can do is to change the admin number via the android app

@@morneo3 I tried. Then it says - you cannot change the number because it's offline. But it isn't offline. Mobile data is turned on all the time :(

@@focus_milena and if you shake the GPS unit, is it still offline? are blue(gps) and yellow(data) LEDs blinking all the time?

Hello. Yellow and Blue LED are blinking?

@@morneo3yes but when I can it goes to voicemail and and says device is offline

@@dtegwop6850is on the SIM card enough money? Data are 'ON' on the SIM card?

@@morneo3 yes SIM card is active but on the app for the TKSTAR it gives a top up option do I need to top up my gps account?

No, you don't need to do it in the app but you need to have some money on it.

Hello. Yellow and Blue LED are blinking?

If the unit isn't online, maybe is in a sleep mode and you will wake it up by a call, or if it isn't working, you don't have enough money on your prepaid card, or maybe data connection of you operator isn't working...

What do you mean by fixing sim card? Please try to describe your problem in a different way, maybe I will know the answer

Elon Musk/ Billgates ✊🏻👑🚤💍 Boss boats 🛶🐢

Hello. By default the device is sleeping after 5 minutes of inactivity. So when you start the app and it's offline, you need to make a call to the device and you will wake it up

Hello. The first step is a check whether you have enough money on your SIM card. There could be also some malfunction of the device or you mobile operator turned off 2G network, which is essential for this device

Hi there. Sure, it does, even without connected siren. It's like a silent alarm - during event, you will recieve a call and after that also a SMS

@@morneo3 thank you so much, I appreciate it.

to my number, my prepaid SIM card, which I have inside

I see. That's a good question. If you will insert a SIM card into this GPS tracker and configure the whole device according to my video - in the end, if you will call this GPS tracker, it will reveal you the ID number in the incoming SMS

Hello. Now that's a good question, but unfortunately I haven't tried the Timer in this way, just setting only 'Timer for daily Arm setup' - so, you should better try it and let me know :) I would say, that if you will in 'Defense zone programming' set to a specific sensor an option [4] bypas, then it shouldn't be activated during the Timer - but also in this case, I'm just guessing

​@@morneo3 I made an alarm to turn on every night at midnight and turn off at 7 am. If I go on vacation alarm will be deactivated the first morning at 7 am which is not a good option. Is it possible to make a different schedule for specific days in a week?

@@weblist9009 Unfortunately it's not possible to make a custom schedule, only one time for ARM and one time for DISARM

Sorry to hear that. I guess this SMS command isn't working for you? begin123456

@@morneo3 This command is working. It turns out that I need to log in my tk905 on another device, through WINNES GPS, but it tells me that the default password (123456) is incorrect.

@@tropsfx also you could try this procedure - www.trackon.net.au/how-reset-gps-tracker-password But I'm not sure, if it is also working on this TKSTAR TK905

Unfortunately I don't know. I have a non-English names from the factory, as this product language mutation was dedicated to Czech and Slovak market.

It depends how much you are using your vehicle where the GPS tracker is placed. If you drive very intensively, it could last let's say 10 days

You are welcome. The device works like this: it's tracking your movement, and after a few minutes of inactivity it will go to sleep. And when you will check the device let's say over the app, it seems like not working (or it's on the 'wrong' position). The easiest way is to call directly the device, and by this you will wake up the device and it will send you actual GPS coordinates and it will be alive also on live map in the app.

It seems, it doesn't have a good GPS signal. Where is it located?

@@morneo3 agree, but shouldn’t work also with the geolocation with sim card like a phone?

@@goncalolemos5932 I know, what you mean, but in case of this GPS unit I would say it's fetching GPS data only from the unit itself. So, if the GPS signal isn't good in the area, it will use last good, saved coordinates.

@@morneo3 i thought could use the sim network to get position, but is working soon went out on the open air. Best feature is the Shock! Really works fine, soon touch the bike alarm pops on my phone! Thanks for ur help

@@goncalolemos5932 You are welcome! Shock alarm is also my favorite, but beware of false alarms caused from wind, if you have it in a motorcycle, like I have one. Like in the care there was never a one false alarm.

Hello. There is no such command for deleting history as far I know. But, by default, there is only a 2M of history, everything older gets deleted automatically.

Hello. Which part is unclear to you, you mean SMS commands?

@@morneo3 yes the SMS commands

@@unrelated-v9194 Ok. For initial configuration and later communication with your GPS tracker you are always using these SMS commands - they are not changing in time, you just need to remember them (like activating or deactivating vibration alarm). And maybe you are confused to which cell number I'm sending these commands. I'm sending those SMS to my prepaid SIM card mobile number, which is always in the GPS unit.

Hello. Have you tried this section in the video? Let me know 'Alarm delay setup' ua-cam.com/video/iTFNnRTnd_A/v-deo.html